Curriculum
- 7 Sections
- 31 Lessons
- Lifetime
Expand all sectionsCollapse all sections
- Section 1: IntroductionThis is the introduction of Section 1 in which we'll cover off the basics of what you'll need to complete the course.5
- Section 2: Basic RefreshersAfter completing this section, you'll have a great foundation to tackle section 3 as well as a great understanding of what the software will do based on reviewing the Programming Code Flow chart.6
- Section 3: Waterproof Temperature SensorAt the end of this section, you'll know everything you need to know about the DS18B20 waterproof temperature sensor6
- Section 4: LED DisplayAt the end of this section, you'll know everything you need to know about the TM1637 7-Segment 4-Digit LED Display.6
- 4.1Lesson 15: Intro1 Minute
- 4.2Lesson 16: The TM1637 LED Display4 Minutes
- 4.3Lesson 17: Installing & Reviewing the Required Libraries6 Minutes
- 4.4Lesson 18: C++ Sketch to Display the Temperature on the LED Display4 Minutes
- 4.5Lesson 19: Section 4 Lab – Wiring the TM1637 and Testing4 Minutes
- 4.6Quiz 43 Minutes4 Questions
- Section 5: Rotary EncoderAt the end of this section, you'll know everything you need to know about the Rotary Encoder used in our project.7
- 5.1Lesson 20: Intro1 Minute
- 5.2Lesson 21: The Rotary Encoder Review & Library Installation7 Minutes
- 5.3Lesson 22: C++ Sketch to detect the momentary push button9 Minutes
- 5.4Lesson 23: C++ Sketch to read Rotary Encoder & set Low Temp value16 Minutes
- 5.5Lesson 24: C++ Sketch to read Rotary Encoder & set High Temp value8 Minutes
- 5.6Lesson 25: C++ Sketch to save Low/High Temps to memory9 Minutes
- 5.7Quiz 53 Minutes4 Questions
- Section 6: Relay & Status LEDAt the end of this section, you'll know everything you need to know about the LOW & HIGH trigger Relay Module.6
- 6.1Lesson 26: Intro1 Minute
- 6.2Lesson 27: The One Channel Low Level Trigger Relay Module5 Minutes
- 6.3Lesson 28: Updating the C++ Sketch to Actuate the Relay and LED’s9 Minutes
- 6.4Lesson 29: Wiring the Relay & LED’s3 Minutes
- 6.5Lesson 30: Section 6 Lab – Finished Project Demonstration8 Minutes
- 6.6Quiz 63 Questions
- Section 7: Bonus SectionWe've added this section as a bonus if you'd like to push the project even further !!!1
Lesson 1: Intro
In this short introduction lecture, we’ll offer an overview of what the course is all about as well as the main goals and objectives of the first section of our course.
Lesson 2: Course Outline
Next